Need advice?
- (86)-0532-012345678
- 15112345678
- info@shotblastingmachines.cn
Get in touch
Leave your details below and one of our specialists will be in touch as soon as possible.
Increase productivity and job satisfaction
The introduction of LED is of course a cost saving and quality improvement for a blast cabinet.
It is essential for your employees that there is good visibility of the product. Every employee likes to keep working and this is only possible with optimal light. Our experience in building and maintaining hundreds of blasting cabinets at home and abroad has led to a method and choice of light that has consistently proven successful.
The advantages:
- sustainable
- lower costs
- higher productivity
- better end result
Optimal placement of lighting
Below you can see an example of the parameters we work with when determining the lighting. Software supports us in the calculation that will lead to the optimal choice.
| Surface | p [%] | E-gem [lx] | E-s [lx] | E-max [lx] | E-s / E-gem |
|---|---|---|---|---|---|
| work surface | – | 1068 | 592 | 1376 | 0.554 |
| Floor | 0 | 1068 | 592 | 1376 | 0.554 |
| Ceiling | 0 | 4.92 | 0.25 | 40 | 0.050 |
| Walls (4) | 0 | 407 | 37 | 2748 | – |
| Working area: Height: 0.000m, Grid 128 x 64 points, Edge zone 0.000m | |||||
