Need advice?
- (86)-0532-012345678
- 15112345678
- info@shotblastingmachines.cn
Get in touch
Leave your details below and one of our specialists will be in touch as soon as possible.
Shot blast container
With a Disa (mobile) blast room you’re able to blast on location in a safe, user and environmentally friendly way.
If your products are too big, too heavy or too complex for a blast cabinet, it is time to upscale to a blast container. Your oprator can then walk around the product and approach it from all sides. The investment required for a blasting container is a lot lower than if you were to go for a fixed blasting hall.
You do not have to make structural changes to your business premises, and the residual value is considerably higher as it is transportable. This allows you to easily resell the blast container, which makes a (mobile) blast container a value-retaining property.
If your opertors are using it day in and day out, the blast container may be less suitable. Blasting efficiency will play a role, which means you can use an automatic recycling system, for example. Then please take a look at this page: blast hall >3 meter.
Standard CE-certified blast container:
- Blast container – 10, 20 of 40 Ft
- Switch box with emergency stop
- Steel plate floor
- TL- LED Fixtures
- Passages for extraction and hoses
- Custom entrance door – locking inside & outside
- Safety switch on door section
- Wall & door trim – black rubber
- Standard sweep pit on the floor
- Blastpot set
- Pat-Jet filter for room extraction with damper on the exhaust (After filter optional)
The blast container can also be fully configured to your specifications and wishes so that your products can be optimally processed, a number of possible options:
Some possible options:
- After-filter on the blow-off line
- recovery with blasting media silo 500L with 1 outlet – C200 blast pot and SSM vacuum set
- Sweeping pit built into the floor
- Easily replaceable hook wall covering – White rubber
- Rail system with hoist mounted on the roof
- Full recovery floor > Suction floor or scraper floor
- Front platform with trolley (+ possible turntable) on rail
- Workstation > Your operator can then blast small products from the outside
We are happy to help you find the most suitable solution for you!
Digital render example setup
Example custom made blast container 1
Example custom made blast container 2
This blast room has been custom built for blasting with glass beads. We’ve installed a Ventifloor system for the smart reclaim of abrasives.
| Technical details | |
|---|---|
| Type | 20/E20 |
| Size (LxWxH) | 6000 x 2440 x 2580 mm |
| Weight (empty) | +/- 5250 kg |
| Air usage | 6000 liter/min. at 7 bar |
| Nozzle | 8.0 mm |
| Connection | 7.5 kW – 7.8 kVA |
| Electricity | 380V – 3ph – 50 Hz |
Example custom made blast container 3
